Marquis K910 Specifications.
Motherboard:
nVidia nForce 3600 dual Opteron Socket F motherboard, ATX form factor
CPU:
AMD® Dual Core Opteron® Model 2000 processors, 90nm, 2x1M L2 cache, Socket F
AMD® Quad Core Opteron® Model 2300 processors, 65nm/45nm, 4x512K L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions
Chipset:
nVidia® nForce Pro 3600 (MCP55 Pro) and nForce 3050 (IO55) chipsets
Intel 6702PXH 64-bit PCI-X I/O Hub
Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR2-667 or 32GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 21.4 GB/s (DDR2-667) or 16.8 GB/s (DDR2-533) accumulated memory bandwidth
Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.
Graphic Subsystem:
ASUS Extreme N6200TC256/TD, Nvidia® GeForce PCX6200TC, PCI-Express x16, 64MB DDR, 350MHZ core, 350mhz DDR memory, 1x400Mhz RAMDAC, one digital port (DVI-D2), one analog port (DB-15), TV-Out (SVHS), single head display
Note: Connecting two monitors to the analog and digital ports will not enable dual head display.
Hard Disk Subsystem:
(K910-T/TR2) Up to four Serial ATA II hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone, software RAID (910-T) or hardware RAID (910-TR2)
(K910-SS) Up to four SAS hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone or software RAID
SCSI Subsystem:
Onboard MCP55 Pro 6-port Serial ATA II controller
(910-TR2) 3Ware Escalade 9650SE-4LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)
(910-SS) Onboard LSI 1068 8-port PCI-X SAS controller
ATA Subsystem:
Single channel Ultra ATA/133 bus mastering IDE controller
CD-ROM Subsystem:
Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive
Sound Subsystem:
Onboard AC97 audio
Network Subsystem:
Onboard dual-port Broadcom BCM5754 PCI-Express Gigabit Ethernet adapter
System Slots:
Two (2) PCI-Express x16 graphic slots (16 lanes)
One (1) PCI-Express x8 slot
Two (2) 64-bit/133MHz bus mastering PCI-X slots
Two (2) 32-bit/33MHz bus mastering PCI slots
System I/O:
One (1) RS-232C 16550 serial port
Four (4) USB 2.0 ports (rear)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) Line in, MIC, and Speaker port
One (1) Optical S/PDIF out port
One (1) Coaxial S/PDIF out port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
1.44M 3.5-inch drive1
Mouse:
Logitech Optical Wheel Mouse, PS/2
Keyboard:
Keytronic KT-2000 104-key PS/2 keyboard
Chassis:
E-ATX Mid Tower case, FCC Class B, black bezel (standard) / beige (optional)
Sample Chassis Images:
Front View, Front View w/ Hotswap Backplane
Two (2) front accessible USB 2.0 ports
Security locks for the front panel and side panel
800W EPS12V power supply with active PFC, 12cm low noise fan
Three (3) accessible 5.25" drive bays
SAS backplane supporting four hotswap Serial ATA/SAS drives
One (1) 12cm exhaust fan, ball bearing, low noise
One (1) 8cm HD cooling fan, ball bearing, low noise
Dimensions: 533mm (D) x 198mm (W) x 425mm (H)
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system
- Floppy drive occupies one of the 5.25in drive bay.
- Digital port not compatible with monitors that use DVI-I cable.