Sovereign 2892 Specifications.

Motherboard:
(2892-SR) Supermicro X9DRi-LN4F+ server board
(2892-SRT) Supermicro X9DRE-TF+ server board

CPU:
Intel Xeon E5-2600 series processors, up to 20MB L3 cache, up to 8GT/s QuickPath Interconnect, Sandy Bridge-EP core, HyperThreading (SMT), Socket LGA2011

Intel Xeon E5-2600 v2 series processors, up to 30MB L3 cache, up to 8GT/s QuickPath Interconnect, Ivy Bridge-EP core, HyperThreading (SMT), Socket LGA2011

Chipset:
(2892-SR) Intel C602 server chipset
(2892-SRT) Intel C602j server chipset

Memory Subsystem:
Twenty four 240-pin DIMM banks supporting up to 768GB DDR3 ECC registered memory, 12 memory slots per CPU bank, Quad channel memory bus

Note: Quad channel memory bus requires 4, 8 or 12 modules installed per CPU bank.
Note: Two processors are required to populate 16, 20 or 24 memory modules.

Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 16M display ram

Hard Disk Subsystem:
Up to twelve (12) SAS or SATA drives. These drives can be configured as standalone unit or hardware RAID.

Note: Using SAS and SATA drives together is an unsupported configuration.

SATA Subsystem:
(2892-SR) Eight (8) SATA 3Gbs ports via C602 chipset
(2892-SRT) Four (4) SATA 3Gbs ports via C602 chipset
Two (2) SATA 6Gbs ports via C602 chipset

SCSI Subsystem:
3Ware Escalade 9750-4i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
None

Sound Subsystem:
None

Network Subsystem:
(2892-SR) Onboard Intel i350A Quad-port PCI-Express Gigabit Ethernet controller, 1000BaseT, RJ-45
(2892-SRT) Onboard Intel X540 Dual-port PCI-Express 10Gigabit Ethernet controller, 10GBase-T, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

System Slots: (low profile cards only)
(2892-SR)
Four (4) PCI Express x16 (v3.0) slots
One (1) PCI Express x8 (v3.0) slot
One (1) PCI Express x8 (v3.0) slot (x4 signal)

Note: Two processors are required to support expansion slots 4,5,6

(2892-SRT)
Two (2) PCI Express x16 (v3.0) slots
Four (4) PCI Express x8 (v3.0) slots

Note: Two processors are required to support expansion slots 3,5,6

System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Four (4) USB 2.0 ports
(2892-SR) Four (4) RJ-45 Ethernet ports
(2892-SRT) Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 2U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
920W EPS12V redundant & hotswap power supply, 80Plus Platinum Level, 94% efficiency
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.5in (H) x 17.2in (W) x 25.5in (D)
SAS2 backplane with single LSI SAS2X28 expander
Twelve (12) hotswap 3.5in hard drive bays
Three (3) 8cm hotswap cooling fans, double ball bearing
Tool-less sliding rails kit

Preinstalled Software:
Fedora or CentOS, 64-bit operating system

Phone: 1.877.ASL.3535