Monarch 9438 Specifications.
Motherboard:
Nvidia nForce Pro 2200 Quad Opteron server platform
CPU:
AMD® Dual Core Opteron® Model 8000 processors, 90nm, 2x1M L2 cache, Socket F
AMD® Dual Core Opteron® Model 8300 processors, 65nm, Barcelona, 4x512K L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions
Chipset:
Nvidia nForce Pro 2200 HyperTransport I/O Hub
Nvidia nForce Pro 2050 HyperTransport I/O Hub
AMD 8132 HyperTransport PCI-X 2.0 Tunnel
Dual channel UltraDMA/133 bus mastering IDE controllers
Memory Subsystem:
Thirty two (32) DIMM banks supporting up to 128GB DDR2-667 or 256GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 42.8 GB/s (DDR2-667) or 33.6 GB/s (DDR2-533) accumulated memory bandwidth
Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of two modules are required per processor.
Graphic Subsystem:
Onboard XGI Volari Z9 with 16MB display ram
Hard Disk Subsystem:
(9438-TR2) Up to six Serial ATA II hard drives in capacity from 80GB to 1TB. These drives can be configured as hardware RAID with level 0, 1, 5, 6, 10, and hotspare supported
(9438-SS) Up to six SAS hard drives in capacity from 36GB to 300GB or six SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.
SCSI Subsystem:
(9438-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)
(9438-SS) Onboard LSI 1068 8-port PCI-X SAS controller
CD-ROM Subsystem:
24X slim CDROM reader (optional DVD/CDRW reader/writer)
Sound Subsystem:
None
Network Subsystem:
Two onboard Broadcom 5721 PCI-Express Gigabit controllers, 1000BaseTX
Onboard Remote Server Management controller, IPMI 2.0
System Slots:
Two (2) full-length PCI-Express x16 expansion slots
One (1) half-length PCI-Express x4 expansion slot
Two (2) half-length 64-bit/133mhz PCI-X expansion slots
One (1) full-length 64-bit/100mhz PCI-X expansion slot
System I/O:
One (1) RS-232C 16550 serial port
One (1) PS/2 Mini DIN port (mouse/keyboard splitter cable included)
Two (2) USB 2.0 ports (rear panel)
Two (2) USB 2.0 ports (front panel)
One (1) 15-pin VGA port
Two (2) RJ-45 ports
One (1) RJ-45 port (remote server management only)
One (1) Firewire 1394a port
Floppy Drive:
Optional
Mouse:
Optional
Keyboard:
Optional
Chassis:
3U Rack mount chassis with sliding rail kit
Dimensions: 5.2" (H) x 16.9" (W) x 27.5" (D)
1000W 2+1 redundant & hotswap power supply with PFC
One (1) accessible slim floppy bay
One (1) accessible slim 5.25in drive bay
(9438-TR2) Serial ATA II backplane supporting six hotswap hard drives
(9438-SS) SAS backplane supporting six hotswap hard drives
Four (4) hotswap chassis fans (2xfront,2xrear)
Passive copper heatsinks and CPU+memory air baffles
Front panel controls and system ID switch
Front panel LED indicators for network & disk activity, system fault
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit edition