Monarch 1800 Specifications.

Motherboard:
AMD Dual Opteron server motherboard, E-ATX form factor

CPU:
AMD® Opteron® processor, .13 micron, 1MB L2 cache, Socket 940
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
AMD-8111 HyperTransport I/O Hub
AMD-8131 HyperTransport PCI-X Tunnel
Dual channel UltraDMA/133 bus mastering IDE controllers

Memory Subsystem:
8 DIMM banks supporting up to 16GB of PC-2700/PC-32001 ECC registered SDRAM, two-way interleaved memory (128-bit), Chip Kill ECC

Note: Memory must be populated in pair

Graphic Subsystem:
Integrated ATI Rage XL with 8MB SDRAM

Hard Disk Subsystem:
Western Digital Special Edition Caviar 80GB Ultra ATA/100 drive, 100MB/s, 7200rpm, 8MB cache, 3 year warranty

SCSI Subsystem:
(1800-T) Silicon Image Sil3114 Serial ATA1502 controller

CD-ROM Subsystem:
24X Ultra DMA/33 slim CDROM reader

Sound Subsystem:
None

Network Subsystem:
Two integrated Broadcom BCM5702 Gigabit controllers, 1000BaseTX, 64-bit/100mhz PCI-X

System Slots:
One (1) 64-bit/100mhz bus mastering PCI-X slot3

System I/O:
One (1) RS-232C 16550 serial ports
One (1) ECP/EPP Bi-directional parallel port
Two (2) USB 1.1 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:
1.44MB slim floppy drive

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
350W coldswap power supply
Dimensions: 1.75" (H) x 17" (W) x 26.9" (D)
One (1) accessible slim floppy bay (used)
One (1) accessible slim CDROM drive bay (used)
Two6 (2) fixed 1" IDE/SATA hard drive bays
Three (3) 9cm high speed classis blowers
26" sliding rails kit4

Preinstalled Software:
Red Hat 32-bit/64-bit Linux with ASL optimized kernel

or

SuSE Linux 9.0 Professional (ASL edition) for AMD64 platform, 64-bit operating system

  1. Require Opteron Model 248 processor or higher.
  2. Serial ATA bus operates at 133MB/s due to the 32-bit PCI bus limitation.
  3. Slot is incompatible with 5V PCI add-on card.
  4. Telco or front mounting is not supported.
  5. Require upgrade from CDROM to DVD-ROM.
  6. When using two IDE hard drives, the built-in optical reader has to be disabled.
Phone: 1.877.ASL.3535