Lancelot 2885 Specifications.

Node Specification:

Motherboard:

Supermicro X11DPT-PS server board, proprietory form factor

CPU:

Intel Xeon Scalable Processor, up to 28 cores, up to 10.40GT/s QuickPath Interconnect, SkyLake-SP or Cascade Lake-SP core, HyperThreading (SMT), Socket LGA3647

Chipset:

Intel C621 server chipset

Memory Subsystem:

Sixteen (16) 240-pin DIMM banks supporting up to 2TB DDR4-2933 ECC registered memory, 8 memory slots per CPU bank, Six channel memory bus

Note: Two processors are required to populate more than 8 memory modules.

Graphic Subsystem:

BMC (IPMI) integrated Aspeed AST2500 VGA (DB-15)

Hard Disk Subsystem:

(T) Up to three (3) SATA 3.5in hard drives. These drives can be configured as software RAID.
(SS) Up to three (3) SATA or SAS 3.5in hard drives. These drives can be configured as software RAID.
(SR) Up to three (3) SATA or SAS 3.5in hard drives. These drives can be configured as hardware RAID.

Storage Controllers:

Ten (10) SATA3 6Gbs ports via C621 chipset
(SS) Supermicro BPN-ADP-8S3008-1UF SAS3/SATA 12Gbps controller, Broadcom 3008, Mini-mSATA interface
(SR) Supermicro BPN-ADP-8S3108-1UF SAS3/SATA 12Gbps RAID controller, Broadcom 3108, RAID level 0, 1, 5, 6, 10, Mini-mSATA interface

CD-ROM Subsystem:

None

Sound Subsystem:

None

Network Subsystem:

Interchangeable Ethernet interface (Gigabit, 10Gigabit, 25Gigabit or Infiniband FDR56) for each node, SIOM interface
Onboard in-band and out-of-band remote server management (IPMI 2.0+KVM) with dedicated LAN port

System Slots:

Two (2) PCI Express x16 (v3.0) slots, low profile, half length
Two processors are required to support both slots

System I/O:

One (1) DB-15 VGA port
Two (2) USB 3.0 ports
One (1) RJ-45 Ethernet port (Management)

Mouse:

Optional

Keyboard:

Optional

Enclosure Specification:

Four (4) hotplug dual-processor nodes
(SR) Supermicro SuperServer 6029TP-HC1R 2U Rack Server
(SS) Supermicro SuperServer 6029TP-HC0R 2U Rack Server
(T) Supermicro SuperServer 6029TP-HTR 2U Rack Server
Air Shroud and copper-based CPU heatsinks (passive design)
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.47" (H) x 17.25" (W) x 28.5" (D)
2200W EPS12V redundant & hotswap power supply, Titanium Level, 96% efficiency
SAS3 backplane with enclosure management
Twelve (12) 3.5in hotswap hard drive bays
Four (4) 8cm chassis cooling fans
Tool-less sliding rail kit with quick release

Preinstalled Software:

Ubuntu, CentOS or Rocky Linux 64-bit operating system

Phone: 1.510.249.5900