Lancelot 2842 Specifications.
Motherboard:
Intel Mukilteo Pentium D serverboard, ATX form factor
CPU:
Intel® Pentium® D processor, 2M+2M full speed L2 cache,
800MHz Quad Pumped FSB, NetBurst micro-architecture, Socket 775, .065 micron, dual core
Intel® Pentium® Extreme Edition processor, 2M+2M full speed L2 cache,
1066Mhz Quad Pumped FSB, NetBurst micro-architecture, Socket 775, .09 micron, HyperThreading (SMT), dual core
Chipset:
Intel E7230 server chipset with PXH-V I/O Bridge and ICH7R SouthBridge
Single channel UltraDMA/100 bus mastering IDE controller
Four channel SATAII controller on ICH7R South Bridge
Memory Subsystem:
Four DIMM banks supporting up to 8GB of DDR2-667 unbuffered SDRAM, non-ECC or ECC, single or dual channel operation
Note: To enable dual channel memory (128-bit), modules must be populated in pairs.
Graphic Subsystem:
Integrated ATI Rage XL graphic accelerator with 8MB
Hard Disk Subsystem:
(2842-S/SR) Up to six Ultra 320/m hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s), level 0, 1, 5, 10, hotspare supported
(2842-T) Up to four Serial ATA hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID
(2842-TR2) Up to six Serial ATA hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or disk array(s) using hardware RAID (level 0, 1, 5, 10, hotspare supported)
ATA Subsystem:
Integrated single channel Ultra ATA/100 controller
SCSI Subsystem:
(2842-SR) LSI Logic MegaRAID 320-1LP single channel Ultra 320/m SCSI RAID controller, 64-bit/66mhz, 64MB ECC cache, optional Battery Backup Unit (BBU)
(2842-S) Integrated Adaptec 7901W single channel Ultra 320/m SCSI controller
(2842-TR2) 3Ware Escalade 9550SX-8LP Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X, 256MB ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
(2842-S/T) 52X Ultra DMA/33 CDROM. Note: 24X slim CDROM can be used in order to preserve the 5.25in expansion drive bay for other peripheral such as tape drive or additional optical device.
(2842-SR/TR2) 24X Ultra DMA/33 slim CDROM
2nd CDRW/DVD-ROM/DVD+RW can be added via the slim drive bay (2842-S/T) or regular 5.25in drive bay (2842-SR/TR2)
Sound Subsystem:
None
Network Subsystem:
Integrated Intel 82573V dual-port PCI-Express Gigabit Ethernet controller, 1000Base-TX
Optional Intelligent Platform Management Interface (IPMI 2.0) board
System Slots: (low profile card only)
Two (2) 3.3V1 64-bit/133MHz bus mastering, full length PCI-X slot
Two (2) 3.3V1 64-bit/100MHz bus mastering, full length PCI-X slot
One (1) PCI Express x4 slot
One (1) IPMI 2.0 slot
System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
1.44MB floppy drive
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 2U Rack mount chassis, FCC Class B
Copper-based active CPU heatsink
(2842-S/T) 550W fixed EPS12V power supply
(2842-SR/TR2) 500W hotswap and redundant power supply
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.5" (H) x 16.7" (W) x 26" (D)
One (1) accessible slim size CDROM bay
One (1) accessible floppy bay
One (1) accessible 5.25" drive bay
(2842-S/SR) Ultra 320/m SCA backplane
- 1 SCSI channel of 6 drives
- SAF-TE optional
- Six (6) hotswap SCA-2 1" hard drive bays
- Six (6) coldswap/hotswap Serial ATA drive bays on 2842-TR2
- Four (4) coldswap/hotswap Serial ATA drive bays on 2842-T
Four (4) 8cm hotswap fans
Sliding rails kit with telco mount support
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system
- Slot is incompatible with 5V PCI add-on card.