Lancelot 1884 Specifications.
Motherboard:
Supermicro X9DRW-iF server board
CPU:
Intel
Xeon E5-2600 series processors, up to
20MB L3 cache, up to
8GT/s QuickPath Interconnect,
Sandy Bridge-EP core, HyperThreading (SMT), Socket LGA2011
Intel
Xeon E5-2600 v2 series processors, up to
30MB L3 cache, up to
8GT/s QuickPath Interconnect,
Ivy Bridge-EP core, HyperThreading (SMT), Socket LGA2011
Chipset:
Intel
C602 server chipset
Memory Subsystem:
Sixteen 240-pin DIMM banks supporting up to 512GB DDR3 ECC registered memory, 8 memory slots per CPU bank,
Quad channel memory bus
Note: Quad channel memory bus requires 4 or 8 modules installed per CPU bank.
Note: Two processors are required to populate 12 or 16 memory modules.
Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 16M display ram
Hard Disk Subsystem:
(1884-T) Up to four
SATA drives. These drives can be configured as standalone unit or software RAID.
(1884-SR) Up to four
SAS or four
SATA drives. These drives can be configured as standalone unit or hardware RAID.
Note: Using SAS and SATA drives together is an unsupported configuration.
SATA Subsystem:
Two (2) SATA 6Gbs ports
Eight (8) SATA 3Gbs ports
SCSI Subsystem:
(1884-SR) 3Ware
Escalade 9750-4i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD,
PCI-Express x8, 512MB DDR2-800 ECC cache, optional
Battery Backup Unit (BBU)
CD-ROM Subsystem:
Optional slim DVD optical reader/writer
Sound Subsystem:
None
Network Subsystem:
Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
System Slots:
Two (2) PCI Express x16 (v3.0) slots, full height, half length
System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Four (4) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
Floppy Drive:
None
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
600W EPS12V single power supply,
80Plus,
94% efficiency
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7in (H) x 17.2in (W) x 23.5in (D)
One (1) accessible slim size CDROM bay
SAS backplane with enclosure management
Four (4)
hotswap hard drive bays
Five (5) 4cm
counter-rotating chassis fans
Sliding rails kit with telco mount support
Preinstalled Software:
Fedora or CentOS 64-bit operating system