Motherboard:
Intel Mukilteo Core 2 Duo Server board
CPU:
Intel® Core® 2 Duo processor, 2M or 4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, dual core
Intel® Core® 2 Duo Extreme processor, 4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, dual core
Intel® Core® 2 Quad Extreme processor, 4M+4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, quad core
Chipset:
Intel 3000 (Mukilteo-2) server chipset with 6702 PXH-V I/O Bridge and ICH7R SouthBridge
Single channel UltraDMA/100 bus mastering IDE controller
Four channel SATAII controller on ICH7R South Bridge
Memory Subsystem:
Four DIMM banks supporting up to 8GB of DDR2-667 unbuffered ECC SDRAM, single or dual channel operation
Note: To enable dual channel memory (128-bit), modules must be populated in pairs.
Graphic Subsystem:
Onboard ATI ES1000 graphic accelerator with 32M video ram
Hard Disk Subsystem:
Up to four Serial ATA hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID
ATA Subsystem:
Onboard single channel Ultra ATA/100 controller
SCSI Subsystem:
(1178-TR2) 3Ware Escalade 9550SX-4LP Serial ATA II RAID controller, 4-port, 64-bit/133mhz PCI-X
CD-ROM Subsystem:
8X slim DVD-ROM optical reader
Sound Subsystem:
None
Network Subsystem:
Onboard Broadcom BCM5721 PCI-Express Gigabit Ethernet controllers, 1000Base-TX
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)
System Slots:
One (1) 3.3V1 64-bit/133MHz bus mastering PCI-X slot, full height
One (1) bus mastering PCI-Express x8 slot, full height
One (1) IPMI 2.0 slot
System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
Two (2) USB 2.0 ports (front accessible)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
None
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 1U Rack mount chassis, FCC Class B
400W EPS12V power supply with PFC
Front panel LED and system ID locator
Dimensions: 43.6mm (H) x 444mm (W) x 600mm (D)
One (1) accessible 5.25in peripheral bay (used)
One (1) SATA backplane
Four (4) hotswap SATA hard drive bays
Six (6) 40x40x28mm system cooling fans with fan control
Air duct baffle for the processor
Copper-based passive heatsink for the processor
Sliding rails kit (telco mount unsupported)
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit