The package smartmontools is required to access the hard disk SMART data. ASL recommends using revision 5.33 or higher. If the system has an older version or the package is not installed, the source RPM and 32-bit binary for smartmontools can be downloaded here:
http://updates.aslab.com/utility/linux/
Accessing SMART data on disk connected to 3ware Escalade 9750 controller:
smartctl -a -d 3ware,
For example, the command below retrieves the SMART data for the disk connected to the port 5 of the 2nd controller:
# smartctl -a -d 3ware,5 /dev/twl1
Accessing SMART data on a disk connected to the 3ware Escalade 9000S, 9500SX or 9650SE controller:
smartctl -a -d 3ware,
For example, the command below retrieves the SMART data for the disk connected to the port 5 of the 2nd controller:
# smartctl -a -d 3ware,5 /dev/twa1
Accessing SMART data on disk connected to the 3ware 7000 and 7506 controllers:
smartctl -a -d 3ware,
For example, the command below retrieves the SMART data for the disk connected to the port 3 of the 1st controller:
# smartctl -a -d 3ware,3 /dev/twa0
Accessing SMART data on disk connected to the Marvell SATA I or II controllers:
smartctl -a -d marvell <device name>
For example:
# smartctl -a -d marvell /dev/sda